4 x 48 x 1.75 - Prince RoyalPlate Plus Tie-Rod B400480ABACA07B
The RoyalPlate Plus Plating, A and B Versions, prevents rust and corrosion more than twice as long as hard chrome plating and gas nitride treated steel bar. This cylinder line has exceptional paint performance with aircraft quality two-part chemical cure polyester urethane paint. This aircraft quality paint will not fade and will outperform powder coating for the life of the cylinder. The cylinder is protected with a 3 year cylinder warranty and a seven year RoyalPlate rod warranty. MADE IN THE USA!
- Honed Tubing
- Heavy duty, high strength tie rods
- RoyalPlate Plus¨ plating on rod (Learn More)
- Induction hardened piston rods (except 2Ó)
- Flexible configurations
- Exceptional paint performance-Aircraft quality two-part paint
- 3 Year Cylinder Warranty (see Prince catalog for full details)
- 7 Year Warranty on rods (see Prince catalog for full details)
- A - 3/16 cylinder tube wall thickness
- B, C - SAE 3/4-16 extend & retract points
- D - 1.015 clevis pin hole size
- E, F - 1 3/4 base clevis throat depth with 2 7/16 from pin center to port center
- G - 1 7/8 rod clevis throat depth
- J - 1.06 min. distance between ears at pin center line
- K - 1 1/4 base clevis ear radius
- L - 1 1/4 rod clevis ear radius
- M - 1 1/2 Ð 12 UNF-3 piston rod clevis thread size
- N - 1 1/4 piston width
- O - 1 13/16 gland width
- Note: 1 3/4 rod diameter. Outside Sq. Dim. Butt - 5.063, Gland 5.063
- 4'' Bore
- 48'' Stroke
- 1.75'' Rod Dia.
- 58.25'' Retract
- 106.25'' Extend
- 9920 lbs. Column Load
- SAE 8 Port Dia.
- 1'' Pin Dia.